Swimming Pool Filtration Plant

Owning and maintaining an aboveground or in ground swimming pool requires an investment of money, time & several pieces of important swimming pool equipment that will keep your pool in top-working condition, and leave you free to enjoy more. We carry a complete line of swimming pool equipment - top-quality products from the best manufacturers in the business.

Pollution in pool water comes either from the environment or is carried into the water by the swimmers. Environmental pollution includes dust, leaves, chemical wastes, pollen, spores, bacteria and so on, that are blown into the water by the wind. Swimmers carry other pollutants into the water: sweat, suntan oils, urine, bacteria, viruses, etc.

Every swimming pool has a circulation pump and filter. The filters most common these days are sand filters. The pool pump ensures that the swimming pool water moves through the filter every day, thus removing unwanted pollutants and disinfected organic materials as quickly as possible.

Generally, the swimming pool pump should run for at least 6 - 8 hours each day. There is usually a timer which cycles the pool pump on and off to ensure this constant filtration. The circulation of pool water will remove floating or suspended particles of dirt from the water, but has no effect on the substances which have settled to the bottom of the swimming pool or "stuck" to the walls.

Depending on the environmental conditions and swimmer load, the swimming pool needs regular brushing and vacuuming, generally about once a week in the swimming season for home pools. With the circulation pump turned off, the walls and floor of the pool are swept with a stiff brush. When the "dust" from the brushing settles, it is vacuumed off the floor of the swimming pool. The pool must also be vacuumed after treating with a flocculant. Nowadays, there is a variety of automatic swimming pool cleaners, which suck the dirt off the walls and floor of the swimming pool whenever the pool pump is running. These are really great for pool owners who never seem to have the time for swimming pool chores.

After vacuuming is done, it is time to backwash the filter. Sand filters trap dust and dirt, as the name implies, in a bed of sand. When the filter has accumulated a large amount of dirt, the water cannot pass freely through the sand and the filter loses efficiency as the pressure increases. Backwashing sends water backwards through the filter and flushes the trapped dirt out. After backwashing, you will notice an increase in return pressure to the pool, and if you have a pressure guage, you should notice an increase of at least 0,5 bar.

Products We Offered

• Swimming pool filter / pump
• Swimming  Pool side equipments(grating, ladders, multi floor inlet, skimmers, suction port, main drain, pool cover)
• Swimming Pool Cleaning equipments (Brush, vacuum head, net, telescopic head, vacuum hose, floating tablet dispenser, suction sweeper)
• Swimming  Pool side equipments (grating, ladders, multi floor inlet, skimmers, suction port, main drain, pool cover)
• Swimming  Pool chemicals (tcca tablet, tcca granular, liquid chlorine, hydrochloric acid(hcl), poly aluminum chloride, alum)